Hypercom T7 Series Troubleshooting Manual page 29

Chapter 1
Step Action
The terminal performs a self-test and displays the
EPROM version.
The terminal performs a self-test and displays the
Memory Page status.
The terminal performs a self-test and displays the
EPROM version.
If the terminal has an EPROM of less than 2.00,
the following message appears.
N
OTE
If the terminal has an EPROM of 2.00 or higher,
the terminal displays the following message.
N
OTE
2 The current software application has been
deleted from the terminal's Boot level and is ready
to be configured to receive a new software
application download. Refer to "Configuring a
Terminal for a Software Application Download" on
page 1-12 .
'SRJMKYVMRK E 8IVQMREP JSV E 7SJX[EVI %TTPMGEXMSR
(S[RPSEH
The terminal will need to be configured by performing a Function 2 and entering a Terminal
Identification Number and the INIT and NMS telephone numbers to dial the host for a software
application download.
One of the following screens appear, depending on the terminal's EPROM version.
7GVIIR 
EPROM version
If the EPROM is less than 2.00, the terminal
displays the following message.
N : PE means Program Error, indicating the
OTE
terminal has no software.
1-12
: PE means Program Error, indicating the
terminal has no software.
: PE means Program Error, indicating the
terminal has no software.
T7 Series Troubleshooting Manual
Terminal display
7$(350[[[
:$,7 6(/)7(67
0(025< 3$*( 67$786
22 )))))))
7$(350[[[
:$,7 6(/)7(67
&21),*85( 7(50,1$/
25 &$// +(/3  3 (
3/($6( ,1,7,$/,=(
25 &$// +(/3  3 (
Terminal display
&21),*85( 7(50,1$/
25 &$// +(/3  3 (
940114-020