Hypercom T7 Series Troubleshooting Manual page 30

7GVIIR 
EPROM version
If the EPROM is 2.00 or higher, the terminal
displays the following message.
N : PE means Program Error, indicating the
OTE
terminal has no software.
Step-by-Step
To download the terminal with software.
Step Action
Press the key sequence: Function, 2, Enter.
1
Type the password and press Enter. The default
2
password is 0000.
Type the terminal ID and press Enter.
3
Type the INIT phone number and press Enter. The
4
INIT phone number is the number the terminal
dials for initializations.
Type the NMS phone number and press Enter.
5
The NMS phone number is the number the
terminal dials for software downloads.
6 Type the number corresponding to the desired
dial mode and press Enter.
7 If needed, type a PABX access code and press
Enter. For example, type 9 if needed prior to
dialing out. To disable call waiting, type 1170 in
this field.
N
OTE
8 Press Cancel to exit the menu.
If the terminal has an EPROM of less than 2.00,
the following message appears.
N
OTE
940114-020
: To bypass this field, press Enter.
: PE means Program Error, indicating the
terminal has no software.
Hypercom Point-of-Sale
Equipment Information
Terminal display
3/($6( ,1,7,$/,=(
25 &$// +(/3  3 (
Terminal display
0(5&+$17 )81&7,21
(17(5 3$66:25'
7(50,1$/ ,' 180%(5
;;;;;;;;;
,1,7 7(/(3+21( 12
;;;;;;
106 7(/(3+21( 12
;;;;;;
',$/ 721(

3$%; $&&(66 &2'(
(;,735(66 µ&$1&(/¶
&21),*85( 7(50,1$/
25 &$// +(/3  3 (

0(5&+ 352*
38/6(
1-13