Hypercom T7 Series Troubleshooting Manual page 36

Step Action
Press Enter until the terminal scrolls to the Options
5
Bit settings.
n
n
6 Press 01 or 05 and Enter or press Enter to bypass
this field.
Press Enter until the terminal scrolls to the Hook
7
Delay settings.
The Hook Delay default setting is 01. Set to 00, if
attaching a portable cellular phone to the
terminal.
8 Press 00 or 01, and Enter or press Enter to bypass
this field.
9 Press Enter until the terminal scrolls to the Printer
setting.
The terminal displays the current Printer settings
on terminals with EPROM versions 2.00 or higher.
n
n
n
n
n
n
Select the appropriate Printer setting and press
Enter or press Enter to bypass this field.
Press Cancel to exit the menu screen.
10
If the software application has been deleted from
Boot level, the terminal displays the following
message.
If you have existing software, press Function 3,
Enter. The terminal displays the following
message.
940114-020
01=Standard terminal setting
05=Visanet or CES
00=T7E
01=T7P
06=T77F
07=T77S
0A=T7P Thermal
0B=T77T
Hypercom Point-of-Sale
Equipment Information
Terminal display
237,216   

237,216   

+22. '(/$< 

+22. '(/$< 

35,17(5
;;
3/($6( ,1,7,$/,=(
25 &$// +(/3  3 (
3/($6( ,1,7,$/,=(
25 &$// +(/3  ) (
;;
;;
1-19