Removing And Installing Function Selection Switch Ii -E272 - Audi A3 1997 Service

Audi A3 1997 ➤
Electrical system - Edition 10.2003
Special tools and workshop equipment required
◆ Hook for front end 3370
Removing
- Open glove box.
- -> Use special tool 3370 to pull off right dash panel end trim -arrow-.
- -> Squeeze both release tabs together -arrows 1- and pull switch out of guide at glove box in direction of
travel -arrow 2-.
- Unplug connectors.
Installing
Install in reverse order.

1.9 - Removing and installing function selection switch II -E272

164
96 - Lights, Lamps, Switches - interior
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.