Audi A3 1997 Service page 46

Audi A3 1997 ➤
Electrical system - Edition 10.2003
Installing
Install in reverse order, paying attention to the following:
- To facilitate positioning of alternator, drive back bushings for retaining bolts slightly.
- Make sure ribbed belt is properly positioned and correctly routed.
- -> Ribbed belt routing on vehicles with no air conditioner
- -> Ribbed belt routing on vehicles with air conditioner
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
Connect battery. Action to be taken => Page
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
Start engine and check belt running.
with respect to the correctness of information in this document. Copyright by AUDI AG.
Tightening torques
Component
Alternator to bracket
Terminal 30/B+ to alternator
38
27 - Starter, Current supply
7 .
Nm
25
16