Removing And Installing Front Seat Heating Switch - Up To Model Year 2000; Removing And Installing Front Seat Heating Switch - As Of Model Year 2001 - Audi A3 1997 Service

1.4 - Removing and installing front seat heating switch - up to Model Year 2000

Removing
- Remove trim for centre section of dash panel.
=> General Body Repairs, Interior; Repair Group 68
- -> Use flat screwdriver to carefully prise seat heating switch out of mount -arrow-.
- Unplug connector.
Installing
Install in reverse order, paying attention to the following:
- Plug in connector.
- Press switch into mount in dash panel and engage.

1.5 - Removing and installing front seat heating switch - as of Model Year 2001

Removing
Vehicles with no air conditioner:
- Remove radio.
=> Radio, Telephone, Navigation; Repair Group 91
- -> Unclip trim for heater controls -arrows-.
Electrical system - Edition 10.2003
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1.4 - Removing and installing front seat heating switch - up to Model Year 2000
Audi A3 1997 ➤
161