Replacing Main Beam Bulb (Gas-Discharge Headlight); Replacing Side Light Bulb (Gas-Discharge Headlight) - Audi A3 1997 Service

Audi A3 1997 ➤
Electrical system - Edition 10.2003
◆ Retaining ring can only be fitted in one position.
- Insert new bulb in housing, taking care not to touch glass bulb with bare hands.
- Secure gas-discharge lamp with retaining ring.
- Re-attach connector and close housing cover.
- Install headlight => Page

1.12 - Replacing main beam bulb (gas-discharge headlight)

• Preparation for bulb replacement => Page
Removing
- Detach cover from headlight housing.
- -> Unplug connector -3- at main beam bulb.
- Disengage spring clip -1- and take bulb -2- out of housing.
Installing
Install in reverse order, paying attention to the following:
- Insert new bulb in housing, taking care not to touch glass bulb with bare hands.
- Secure bulb with spring clip.
- Re-attach connector and close housing cover.

1.13 - Replacing side light bulb (gas-discharge headlight)

• Preparation for bulb replacement => Page
Removing
- Detach cover from headlight housing.
104
94 - Lights, Lamps, Switches - exterior
97 .
101
101
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.