Side-Mounted Turn Signal Indicators; Removing And Installing Side-Mounted Turn Signal Indicator - Audi A3 1997 Service

Audi A3 1997 ➤
Electrical system - Edition 10.2003
- -> Turn adjusting screw -arrow- to set height. No provision is made for lateral adjustment.

5 - Side-mounted turn signal indicators

5.1 - Side-mounted turn signal indicators
Attention:
◆ Disconnect battery earth strap before working on electrical system.
◆ On vehicles fitted with telematics system, activate telematics control-unit service mode before disconnecting
battery.=>Radio, Telephone, Navigation; Repair Group 91
- Heed (if necessary obtain) code for vehicles with encoded radio/radio navigation system (RNS).
- Disconnect battery earth strap with ignition switched off.
Note:
Action to be taken after re-connecting power supply => Page

5.2 - Removing and installing side-mounted turn signal indicator

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Removing
- -> Press turn signal indicator in direction of travel against retainer
-arrow- and remove carefully from wing penetration.
- Pull housing for side-mounted turn signal indicator off bulb holder.
Note:
Fig. shows vehicle as of Model Year 2001.
Installing
Install in reverse order.
134
94 - Lights, Lamps, Switches - exterior
7 .