Servicing Connection Socket For Towing Hitch; Removing And Installing Connection Socket For Towing Hitch - Audi A3 1997 Service

Removing
- Remove front bumper.
=> General Body Repairs, Exterior; Repair Group 63
- -> Unscrew nuts -arrows- and detach horns from mount.
- Unplug connectors.
Notes:
◆ On Audi A3, horns are installed beneath left headlight as illustrated.
◆ On Audi S3, horns are located on a level with radiator grille.
Installing
Install in reverse order.

6 - Servicing connection socket for towing hitch

6.1 - Servicing connection socket for towing hitch
Attention:
◆ Disconnect battery earth strap before working on electrical system.
◆ On vehicles fitted with telematics system, activate telematics control-unit service mode before disconnecting
battery.=>Radio, Telephone, Navigation; Repair Group 91
- Heed (if necessary obtain) code for vehicles with encoded radio/radio navigation system (RNS).
- Disconnect battery earth strap with ignition switched off.
Note:
Action to be taken after re-connecting power supply => Page

6.2 - Removing and installing connection socket for towing hitch

Removing
- -> Screw out bolts -arrows-.
Electrical system - Edition 10.2003
7 .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Audi A3 1997 ➤
5.2 - Removing and installing horn
187