Update With Micro Sd Card - Kanardia Horis Installation And User Manual

Horis User Manual
depends on number of Kanardia instruments connected to the
CAN bus.
4. Select Horis from the list and then select Update.
5. Confirm the selection – press Yes and Kanja will start the
firmware update.
6. Once the update has been completed, press the Back arrow
on the top left corner of the Kanja app. This brings back the
device list.
7. Select Airu from the list and then select Update. This will
update the AD-AHRS-GPS module, which is hidden inside the
Horis. (Slave Horis does not have such module inside.) Red
crosses will appear on the Horis screen during the update. This
is normal.
8. Once the update has been completed and red crosses has dis-
appeared, Kanja can be disconnected and Blu removed. New
firmware is installed and ready to use.
2.11.2

Update With Micro SD Card

Only Horis models that have SD card slot can be updated this way. If
Horis does not have the SD card slot, Blu must be used. See section
2.11.1.
1. Download the latest Horis softare from our web site and copy
it to the micro SD card. The filename must begin with Horis
and it must end with .bin. For example, Horis360.bin is a
valid name. 360 is used to identify version 3.6.
2. Insert the SD card into Horis and power it on. Horis will check
for the precence of the SD card during boot cycle.
2.11 Software Update
34
© Kanardia 2021