Compass Calibration; Compass Offset; Nmea Out; Initial Brightness - Kanardia Horis Installation And User Manual

Horis User Manual
Figure 31: An example of local time set for Newfoundland and
Labrador, which is UTC - 2h 30min.
4.6.11

Compass Calibration

This option is available only when Magu magnetic compass is con-
nected to the CAN bus. Please refer to the Magu manual for the
details.
4.6.12 Compass Offset
This option is available only when Magu magnetic compass is con-
nected to the CAN bus. Please refer to the Magu manual for the
details.
4.6.13

NMEA Out

Here you can select the baudrate for the RS232 output port and
the output format. 9600 bauds and Standard are default values, see
Figure 32. Your (device) transponder may expect different speed or
format. The standard format will send RMC, GGA and GSA NMEA
sentences every second. The TQ-KTX2 format will send only RMC
sentence every second.
4.6.14

Initial Brightness

Use this option to set the Horis LCD display brightness at startup.
Default value is 100%, but if find Horis display too bright, you may
54
4.6 Settings
© Kanardia 2021