Operations - Kanardia Horis Installation And User Manual

Horis User Manual
1. UTC time and GPS reception symbol. Horis gets time from
GPS and the time will be shown only when GPS signal is avail-
able.
2. Local, sunrise and sunset times. They all depend on GPS signal
as well and they are visible only when GPS signal is available.
Local time requires correct time zone - see section 4.6.10 for
more details.
3. Stopwatch can be used by turning the knob. Symbols on the
left an right side of the stopwatch time define available actions.
• Turn right to start the stopwatch.
• Turn either left or right to stop for lap.
• Turn left to reset or right to continue.
You can switch the pages even when the stopwatch is running.
In this case, a stopwatch symbol appears on the top right part
of each screen.
4. Flight time starts counting automatically when takeoff condi-
tions is detected and stops when landing is detected. The time
restarts with zero on next takeoff.
Note, false landings may be detected when Horis is used in a
rotorcraft. A slow speed or hovering will falsely trigger landing
event and flight time will reset when movement is resumed.
4

Operations

Horis is operated using a single push knob. You can do the following
actions with the knob:
• Rotate the knob to change something.
42
4. Operations
© Kanardia 2021