Response Time - Kanardia Horis Installation And User Manual

Horis User Manual
Yellow end define the bottom yellow part of the speed tape.
If you do not want to have yellow range on the bottom part,
set Yellow end to the same value as Start.
• Green end defines the end of the green range on the speed tape.
• VNE defines V
speed the yellow upper range ends and the red range begins.
The red range never ends. Yellow upper range is defined auto-
matically between Green end and VNE.
You can also mark valid extended flap position region on the speed
tape. In this case you also set:
• White start defines the start of the white part.
• White end defines the end of the white part.
Figure 25: Definition of the speed tape colours.
4.6.3

Response Time

This option defines sensitivity of individual parameters of artificial
horizon, Figure 27. Each parameter may be set to one of the follow-
ing:
(velocity never exceeded) airspeed. At this
NE
47
4.6 Settings
© Kanardia 2021