Horis Screens; Ad-Ahrs - Kanardia Horis Installation And User Manual

Horis User Manual
3. When correct file is found on the SD card, an update proce-
dure will commnece. A black/white flasing screen informs that
update is in progress. It takes about 9-10 seconds to finsih the
update.
4. After the update, Horis displays a window telling about update
success. This window is dislayed only once after each successful
update.
Note: Horis will not allow downgrade. For example, if current Horis
version is 4.5, it will not accept any updates older then 4.5.
If flashing finishes after 4 seconds and the update success window is
not shown, then the update file is probably corrupt. Download the
file again from our web site and try again. Do not forget to use safe
remove option after copy, before the SD card is removed from PC.
3

Horis Screens

Horis can show four different screens: AD-AHRS, Direction Indica-
tor, G-Meter and Chrono. Please refer to section 4.6.5 on how to
change the order of screens or how to enable/disable them.
Push the knob to change between screens.
3.1

AD-AHRS

Typically, the AD-AHRS screen appears as soon as Horis is powered
on. The screen layout has been optimised to show all relevant flight
information. Figure 18 shows the screen.
The following parameters are shown on the screen:
1. Indicated airspeed indicator shows airspeed obtained from the
differential pressure sensor and the speed tape.
35
3. Horis Screens
© Kanardia 2021