Mounting On Profile Rail (Only With Bosch Rexroth Accessories); Fastening Profile Adapter On Module; Fastening Module With Profile Adapter To Profile Rail - Bosch Rexroth IndraControl S67 Application Description

32/85 Bosch Rexroth AG
Mounting Module
5.6 Mounting on Profile Rail (only with Bosch Rexroth Accesso‐
ries)
5.6.1

Fastening Profile Adapter on Module

5.6.2

Fastening Module with Profile Adapter to Profile Rail

Rexroth IndraControl S67 HTL Encoder/Counter Module 4 Digital Inputs/Outputs (4×M12)
Fig. 5-3: Mounting the mounting rail adapter
In addition to the fastening using a mounting rail adapter, the S67-HTL-INC-
M12 module can be fastened to a profile rail using a profile adapter and slot
nuts. The system has to support this fastening type. The slot nuts are not in‐
cluded in the scope of delivery.
Screw the S67-HTL-INC-M12 module with the profile adapter using the M4
threaded screws provided as shown in the figure below.
Fig. 5-4: Fastening a profile adapter
To fasten the S67-HTL-INC-M12 module to a profile rail of the system, two
slot nuts are required with one screw each (thread length has to match the
profile).
DOK-CONTRL-S67HTLM12**-AP02-EN-P
50
51
52