Structuring The Documentation - Bosch Rexroth IndraControl S67 Application Description

DOK-CONTRL-S67HTLM12**-AP02-EN-P
Rexroth IndraControl S67 HTL Encoder/Counter Module 4 Digital Inputs/Outputs (4×M12)
Purpose
1.4

Structuring the Documentation

Mounting
Product
Selection
phases (assembly/installation)
Presales Aftersales
Design engineer
Mechanic/
electrician
Programmer
Technologist
Target
Process
groups
specialist
Select
Prepare
Activities
Design
Construct
Fig. 1-1: Assigning this documentation to the target groups, product phases
and target group activities
This documentation is intended for users wanting to commission a decentral
HTL incremental encoder/counter interface module of type S67-HTL-INC-
M12. General information about this module is given. Moreover, mounting
and cabling of the module is explained. The basic commissioning steps and
the configuration of the IndraControl S67 station are also described.
The first part of the document contains important information about the inten‐
ded use as well as information about the safety instructions
portant Instructions on Use" on page 9
structions" on page 11).
The chapter 4 "Device Description" on page 13
of the structure and the functions of the HTL incremental encoder/counter in‐
terface module.
chapter 5 "Mounting Module" on page 29
HTL incremental encoder/counter interface module.
For information on the data and supply cables, refer to
ing Data and Supply Cables" on page
chapter 7 "Commissioning" on page 45
HTL incremental encoder/counter interface module.
The parameterization of the module is described in
tion" on page 47.
chapter 9 "Process Images" on page 55
process images of the HTL incremental encoder/counter interface module.
The functionality of the counter function of the module is described in
10 "Counter Function" on page
chapter 11 "Diagnostics via LED Signals" on page 67
nostic options for the HTL incremental encoder/counter interface module.
The module exchange is described in
on page 71.
chapter 13 "Accessories" on page 73
cessories for the HTL incremental encoder/counter interface module.
Bosch Rexroth AG
Engineering Commissioning
Programmer
Commissioning engineer
Technologist
Process specialist
Unpack Parameterize Optimize
Mount Program Test
Install Configure
Simulate
and chapter 3 "Using safety in‐
contains a short overview
describes the assembly of the
37.
describes the commissioning of the
contains information about the
61.
chapter 12 "Maintenance and Service"
contains information about the ac‐
7/85
About this Documentation
Operation Decommissioning
Machine
operator
Maintenance Mechanic/
technician electrician
Service Disposal company
Operate Dismount
Maintain Dispose
Remove
faults
Create
the NC program
(chapter 2 "Im‐
chapter 6 "Connect‐
chapter 8 "Parameteriza‐
chapter
describes the diag‐