Microsoft Windows 3.1X; Windows 95/98 Driver - Promise Technology FASTTRAK66 User Manual

Manual EN 05-08-1999 11:30
Operating System Installation

Microsoft Windows 3.1x

The Windows 3.1x operating systems are supported by the FastTrak66 onboard
BIOS. No additional drivers are required. Once the card is installed and the
system rebooted, proceed with partitioning/formatting each FastTrak66 disk
array as if it were a physical drive.
Microsoft Windows95/98 driver
Windows95/98 setup will show a "New Hardware Found" dialog box. Under
versions Win95 4.00.950 and 4.00.950A an "Unknown PCI Device" will be
detected. Under Win95 v. 4.00.950 B and Win98 "PCI RAID Controller" will
be displayed.
NOTE: To check the Windows95/98 version number, click the Control
Panel from My Computer followed by the System icon. Under "System:"
note the version number.
1) In the dialog box choose "Driver from disk provided by hardware manu
facturer" button.
2) In the A: drive, insert the FastTrak66 utility diskette and type in
"A:\WIN9x" when prompted for the directory.
3) Select "Promise Technology, Inc. PCI FastTrak66 Driver" and click on
Next. The FastTrak66 driver is now copied onto the system and entered into
the Windows95/98 driver database.
4) When the "System Settings Change" dialog box appears, remove the floppy
diskette and click on "Yes" to restart the system. Windows95/98 will then
restart for the driver installation to take effect.
Confirming Windows95/98 Installation
1) From Windows95/98, open the Control Panel from My Computer followed
by the System icon.
2) Choose the "Device Manager" tab and click the "+" in front of the "SCSI
Controllers" hardware type.
3) The driver "Promise Technology, Inc. PCI FastTrak66 Driver" driver
should be installed.
Pagina 52
52