Controller Window - Promise Technology FASTTRAK66 User Manual

Manual EN 05-08-1999 11:30 Pagina 40
Fastcheck™ Monitoring Utility
To halt the Rebuild process, right-click the Array # again. The pull-down menu
will appear showing the Stop Rebuild option as shown below.
Once "Stop Rebuild" is selected, you will be asked to verify "Cancel Rebuild?"
Click Yes to Stop or No to continue Rebuild.

Controller Window

Clicking on the Controller tab, will reveal the Controller Window. This dis-
plays physical information about the location of FastTrak66, data channels on
the card, and the attached drives.
Controller Card Information
By left-clicking on the FastTrak icon, the right pane shows the following infor-
mation categories for that array:
PCI Slot: Shows identification of PCI slot where FastTrak66 resides
IRQ: Identifies interrupt request assigned to PCI slot
Bus Master Base: Shows base address in hex numbering for board's bus
master function
40