Getting Started; Unpacking Your Fasttrak66 - Promise Technology FASTTRAK66 User Manual

Manual EN 05-08-1999 11:30
Chapter 2
This section is designed to get you started for installation of your FastTrak66.

Unpacking Your FastTrak66

When you receive the FastTrak66, the package should contain the items listed
below:
• FastTrak66 Ultra ATA/66 RAID Card
• FastTrak66 User's Manual
• Registration Card
• FastTrak66 Driver floppy diskette
• Two Internal 80-wire/40-pin Ultra ATA/66 hard drive cables (18" length)
CAUTION IN HANDLING AND INSTALLING!
Before installing the adapter into an existing system, backup any necessary
data. Failure to follow this accepted PC practice could result in data loss.
Power off the system. Be careful when handling the controller. The FastTrak,
like any valuable part of your computer system, is susceptible to static elec-
tricity. Be sure you are well grounded for the installation.
If ANY of the contents are missing or appear to be damaged, please contact
your dealer or distributor immediately.
Board Layout
IDE 2 IDE 1
Pagina 9

Getting Started

First IDE channel
Second IDE channel
4-pin LED connector:
Pin1PWR, Pin2 GND,
Pin3 GND, Pin4PWR
9
Connectors
IDE1
IDE2
LED