Drive Attachment Order By Connector; Installation Scenarios - Promise Technology FASTTRAK66 User Manual

Manual EN 05-08-1999 11:30
Drives Attachment Order By Connector
The following table shows the order in which drives should be connected to the
FastTrak66 card.
Total Drives IDE 1
One M
Two M
Three M&S
Four M&S

Installation Scenarios

Examine the following installation scenarios which may apply to your system.
Then proceed to Chapter 4 which covers operation of the card's BIOS utility
and array creation.
FastTrak66 coexisting with onboard ATAPI CD-ROM
Do NOT attach ATAPI devices to FastTrak66. FastTrak66 is for hard drives
only.
ATAPI IDE CD-ROM drives or other devices can be installed on Mainboard or
add-on IDE controllers.
No configuration is necessary on the mainboard BIOS setup.
Pagina 14
Hardware Installation
IDE 2
M = Master
S = Slave
-
M
M
M&S
14