Adjusting The Telescoping Shaft; Starting / Stopping The Engine - Stihl PC 70 Instruction Manual

Open the filler cap.
N
Filling up with fuel
N
WARNING
After fueling, tighten down the filler cap
as securely as possible by hand.
Changing the Fuel Pickup Body
Change the fuel pickup body every year:
Drain the fuel tank.
N
Use a hook to pull the fuel pickup
N
body out of the tank and take it off
the hose.
Push the new pickup body into the
N
hose.
Place the pickup body in the tank.
N
PC 70, PC 75
Adjusting the Telescoping
Shaft
PC 75 only
WARNING
Always shut off the engine and fit the
transport guard
1
Loosen the wing screw (1).
N
Adjust shaft to the required length.
N
Tighten down the wing screw firmly.
N
Starting / Stopping the
Engine
Controls
7
3
2
1
1 Throttle trigger lockout
2 Throttle trigger
3 Slide control
Positions of slide control
4 STOP-0 – engine off – ignition is
switched off
5 F – normal run position – the engine
is running or can start
6 START – ignition is switched on –
the engine can start
English
4
5
6
51