Pnp/Pci Configuration Setup - QDI SynactiX 5EP Manual

PNP/PCI Configuration Setup

Figure-7 PNP/PCI Configuration Setup Menu
The following indicates the options for each item and describes their meaning.
Item Option
Reset Configuration Enabled
$
"
Data
Disabled
Auto(ESCD)
$ Resources
"
Controlled By Manual
Disabled
$ PCI/VGA Palette
"
Enabled
Snoop
Description
Default setting is Disabled. Select Enabled to reset
Extended System Configuration Data ESCD when
you exit Setup, if you have installed a new
add-on and the system reconfiguration has
caused serious conflicts preventing the OS
from booting.
Disable the configuration data function.
BIOS can automatically configure all boot
and Plug and Play compatible devices. If you
choose Auto, you cannot select IRQ DMA and
memory base address fields, because BIOS
automatically assigns them.
Default setting.
Non-standard VGA cards such as graphics
accelerators or MPEG video cars may not show
colors properly. Enabling this item can solve this
problem.
Manual for SynactiX 5EP/5EI
Chapter 3