QDI SynactiX 5EP Manual page 9

QDI StepEasy
As one of the Legend QDI's innovations, StepEasy is a powerful and efficient Easy Technol-
ogy for PC DIY fans. It provides a friendly interface for you that you can adjust the CPU
frequency conveniently and directly. It is so powerful that you can change the CPU frequency
just in a few seconds under the operating system and have no need to reset the PC or change
the jumpers. In addition, StepEasy can decrease the risk of changing the CPU frequency to
minimum. As long as you conform to the steps of tuning the CPU frequency, there is almost no
risk to adjust the frequency.
10MHz decrease
1MHz decrease
Installation
You can install the QDI StepEasy by the following two means:
1. Run CD, select the installation of QDI StepEasy, then, act step by step according to the
interface prompt.
2. Browse CD and run the setup.exe in the relative directory.
Instruction
Because there exist some risks for the CPU or the motherboard when you change the CPU
frequency, please read the following and refer to the figure above carefully before tuning the
CPU frequency.
button to get the
select frequency
Manual for SynactiX 5EP/5EI
SynactiX 5EP/5EI
10MHz increase
1MHz increase
button to get the
default frequency
S.1