Pnp/Pci Configuration Setup - QDI Superb 3L Manual

PNP/PCI Configuration Setup

Figure-7 PNP/PCI Configuration Setup Menu
The following indicates the options for each item and describes their meaning.
Item Option
l PNP OS Installed Yes
No
l Reset Configuration Enabled
Data
Disabled
l Resources Manual
Controlled By
Auto
l IRQ Resources Press Enter
l IRQ-3~IRQ-15 PCI/ISA PnP
assigned to Legacy ISA
l DMA-0~DMA-7 PCI/ISA PnP
assigned to
Legacy ISA
l PCI/VGA Palette Disabled
Snoop Enabled
Assign IRQ For Enabled
l
VGA Disabled
l Assign IRQ For Enabled
USB
Disabled
Chapter 3
Description
Device resource assign by PnP OS.
Device resource assign by BIOS.
The system BIOS will reset configuration data
once, then automatically set this item as Disabled.
Disables the configuration data function.
Assigns the system resources ( IRQ and DMA)
manually .
Assigns system resources (IRQ and DMA)
automatically by BIOS.
Press enter key to select submenu.
The specified IRQ-x will be assigned to ISA or PCI.
The specified IRQ-x will be assigned to ISA only.
The specified DMA-x will be assigned to ISA or
PCI.
The specified DMA-x will be assigned to ISA only.
Default setting.
Non-standard VGA cards such as graphics
accelerators or MPEG video cars may not show
colors properly. Enabling this item can solve this
problem.
Assigns the needed IRQ for the VGA card.
Does not assign an IRQ for the VGA card, in
order to release the IRQ.
Assigns an IRQ for USB. If an USB device is used
enables this item.
Does not assign an IRQ for USB.
Manual for Superb 3L