Monitoring Conditional Debugging; Configuration Examples For Conditional Debugging - Cisco Catalyst 9200 Configuration Manual

Monitoring Conditional Debugging

nvram: Copy to nvram: file system
rcp: Copy to rcp: file system
running-config Update (merge with) current system configuration
scp: Copy to scp: file system
startup-config Copy to startup configuration
syslog: Copy to syslog: file system
system: Copy to system: file system
tftp: Copy to tftp: file system
tmpsys: Copy to tmpsys: file system
The general syntax for copying onto a TFTP server is as follows:
Device# copy source: tftp:
Device# copy crashinfo:/tracelogs/IOSRP_R0-0.bin_0.14239.20151101234827.gz tftp:
Address or name of remote host []? 2.2.2.2
Destination filename [IOSRP_R0-0.bin_0.14239.20151101234827.gz]?
Note
It is important to clear the generated report or archive files off the switch in order to have flash space available
for tracelog and other purposes.
Monitoring Conditional Debugging
The table shown below lists the various commands that can be used to monitor conditional debugging.
Command
show platform condition
show debug
show platform software trace filter-binary
request platform software trace filter-binary

Configuration Examples for Conditional Debugging

The following is an output example of the show platform condition command.
Device# show platform condition
Conditional Debug Global State: Stop
Conditions Direction
----------------------------------------------------------------------------------------------|---------
MAC Address 0024.D7C7.0054 N/A
Feature Condition Type Value
-----------------------|-----------------------|--------------------------------
Device#
The following is an output example of the show debug command.
Device# show debug
IOSXE Conditional Debug Configs:
Conditional Debug Global State: Start
System Management Configuration Guide, Cisco IOS XE Gibraltar 16.10.x (Catalyst 9200 Switches)
236
Conditional Debug and Radioactive Tracing
Purpose
Displays the current conditions set.
Displays the current debug conditions set.
Displays logs merged from the latest tracefile.
Displays historical logs of merged tracefiles on the
system.