Installing An Smu Package: 3-Step Process - Cisco Catalyst 9200 Configuration Manual

Software Maintenance Upgrade
SUMMARY STEPS
1. enable
2. install add file flash: filename [activate commit]
3. exit
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Device> enable
Step 2 install add file flash: filename [activate commit]
Example:
Device# install add file
flash:cat9k_lite_iosxe.16.09.04.CSCvk70181.SPA.smu.bin
activate commit
Step 3 exit
Example:
Device# exit

Installing an SMU Package: 3-Step Process

This task shows you the 3-step process for installing an SMU package. Use this method to install multiple
SMUs and avoid multiple reloads.
Before you begin
Check that the SMU you are about to install corresponds to the software image installed on your device. For
example, SMU
cat9k_lite_iosxe.16.09.04.SPA.bin
SUMMARY STEPS
1. enable
2. install add file location filename
3. install activate file location filename
4. install commit
cat9k_lite_iosxe.16.09.04.CSCvk70181.SPA.smu.bin
.
System Management Configuration Guide, Cisco IOS XE Gibraltar 16.10.x (Catalyst 9200 Switches)
Installing an SMU Package: 3-Step Process
Purpose
Enables privileged EXEC mode. Enter your password, if
prompted.
Copies the maintenance update package from flash to the
device, performs a compatibility check for the platform and
image versions, activates the SMU package, and makes the
package persistent across reloads. This command extracts
the individual components of the .bin file into the
subpackages and packages.conf files.
You can also copy the SMU package from from a remote
location (through FTP, HTTP, HTTPS, or TFTP).
If the SMU file is copied using TFTP, use
Note
bootflash to activate the SMU.
Exits privileged EXEC mode and returns to user EXEC
mode.
is compatible with software image
197