Cisco Catalyst 9200 Series Instructions

Installing a fan module

Hide thumbs Also See for Catalyst 9200 Series:

Download this manual

Installing a Fan Module

•

Fan Modules Overview

Cisco Catalyst 9200 (C9200) Series switches support two field-replaceable fan modules providing N+1

redundancy support. The switch should be able to operate at ambient temperature if one of the fans fails.

Figure 1: Fan Module

Fan Modules Overview , on page 1

Installation Guidelines, on page 2

Installing a Fan Module, on page 2

Finding the Fan Module Serial Number, on page 3

Extraction handles

Fan LED

Retainer clip

Installing a Fan Module

Page 1 Finding the Fan Module Serial Number, on page 3 Fan Modules Overview Cisco Catalyst 9200 (C9200) Series switches support two field-replaceable fan modules providing N+1 redundancy support. The switch should be able to operate at ambient temperature if one of the fans fails.
Page 2 Installing a Fan Module Installation Guidelines Installation Guidelines Observe these guidelines when removing or installing a fan module: • Do not force the fan module into the slot. This can damage the pins on the switch if they are not aligned with the module.
Page 3 Finding the Fan Module Serial Number Finding the Fan Module Serial Number If you contact Cisco Technical Assistance regarding a fan module, you need to know the fan module serial number. See the following illustration to find the serial number.
Page 4 Installing a Fan Module Finding the Fan Module Serial Number Installing a Fan Module...

C9200 series