Cisco Catalyst 9200 Configuration Manual page 107

Configuring Smart Licensing
Note Authenticated HTTPs proxy configurations are not supported.
To configure and enable the Call Home service through an HTTPs proxy, perform this procedure:
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12. destination address http url
13. active
14. exit
15. exit
16. service call-home
17.
18. exit
19. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2 configure terminal
Example:
Device# configure terminal
Step 3
call-home
Example:
Device(config)# call-home
Step 4 contact-email-address email-address
Example:
Configuring the Call Home Service for Direct Cloud Access through an HTTPs Proxy Server
enable
configure terminal
call-home
contact-email-address email-address
http-proxy proxy-address proxy-port port-number
profile CiscoTAC-1
destination transport-method http
no destination transport-method email
profile name
reporting smart-licensing-data
destination transport-method http
ip http client proxy-server proxy-address proxy-port port-number
System Management Configuration Guide, Cisco IOS XE Gibraltar 16.10.x (Catalyst 9200 Switches)
Purpose
Enables privileged EXEC mode.
Enter your password, if prompted.
Enters global configuration mode.
Enters Call Home configuration mode.
Configures the default email address as
sch-smart-licensing@cisco.com.
93