Cisco Catalyst 9200 Configuration Manual page 43

Administering the Device
SUMMARY STEPS
1. enable
2. configure terminal
3. banner login c message c
4. end
5. show running-config
6. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Device> enable
Step 2
configure terminal
Example:
Device# configure terminal
Step 3 banner login c message c
Example:
Device(config)# banner login $
Access for authorized users only.
Please enter your username and
password.
$
Step 4 end
Example:
Device(config)# end
Step 5 show running-config
Example:
Device# show running-config
Step 6
copy running-config startup-config
Example:
System Management Configuration Guide, Cisco IOS XE Gibraltar 16.10.x (Catalyst 9200 Switches)
Purpose
Enables privileged EXEC mode. Enter your password if
prompted.
Enters the global configuration mode.
Specifies the login message.
c Enters the delimiting character of your choice, for
example, a pound sign (#), and press the Return key. The
delimiting character signifies the beginning and end of the
banner text. Characters after the ending delimiter are
discarded.
message Enters a login message up to 255 characters. You
cannot use the delimiting character in the message.
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
Configuring a Login Banner
29