Cisco Catalyst 9200 Configuration Manual page 153

Configuring Online Diagnostics
Command or Action
Device(config)#
Step 6 diagnostic monitor number test {name | test-id |
test-id-range | all}
Example:
Device(config)#
Step 7 end
Example:
Device(config)# end
Step 8 show diagnostic { content | post | result | schedule |
status | }
Step 9
show running-config
Example:
Device# show running-config
Step 10 copy running-config startup-config
Example:
Device# copy running-config startup-config
System Management Configuration Guide, Cisco IOS XE Gibraltar 16.10.x (Catalyst 9200 Switches)
Configuring Health-Monitoring Diagnostics
Purpose
• name—Name of the test that appears in the show
diagnostic content command output.
• test-id—ID number of the test that appears in the
show diagnostic content command output.
• test-id-range—ID numbers of the tests that appear in
the show diagnostic content command output.
• all—All of the diagnostic tests.
The range for the failure threshold count is 0 to 99.
Enables the specified health-monitoring tests.
The switch number keyword is supported only on stacking
switches.
When specifying the tests, use one of these parameters:
• name—Name of the test that appears in the show
diagnostic content command output.
• test-id—ID number of the test that appears in the
show diagnostic content command output.
• test-id-range—ID numbers of the tests that appear in
the show diagnostic content command output.
• all—All of the diagnostic tests.
Returns to privileged EXEC mode.
Display the online diagnostic test results and the supported
test suites.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
139