Configuring Mac Threshold Notification Traps - Cisco Catalyst 9200 Configuration Manual

Administering the Device
Command or Action
Step 6 end
Example:
Device(config)# end
Step 7
show running-config
Example:
Device# show running-config
Step 8 copy running-config startup-config
Example:
Device# copy running-config startup-config
What to do next
To disable MAC address-move notification traps, use the no snmp-server enable traps mac-notification
move global configuration command. To disable the MAC address-move notification feature, use the no mac
address-table notification mac-move global configuration command.
You can verify your settings by entering the show mac address-table notification mac-move privileged
EXEC commands.

Configuring MAC Threshold Notification Traps

When you configure MAC threshold notification, an SNMP notification is generated and sent to the network
management system when a MAC address table threshold limit is reached or exceeded.
Follow these steps to configure the switch to send MAC address table threshold notification traps to an NMS
host:
SUMMARY STEPS
1. enable
2. configure terminal
3. snmp-server host host-addr {traps | informs} {version {1 | 2c | 3}} community-string notification-type
4. snmp-server enable traps mac-notification threshold
5. mac address-table notification threshold
6. mac address-table notification threshold [limit percentage] | [interval time]
7. end
8. show running-config
9. copy running-config startup-config
System Management Configuration Guide, Cisco IOS XE Gibraltar 16.10.x (Catalyst 9200 Switches)
Configuring MAC Threshold Notification Traps
Purpose
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
35