Cisco Catalyst 9200 Configuration Manual page 108

Configuring the Call Home Service for Direct Cloud Access through an HTTPs Proxy Server
Command or Action
Device(config-call-home)# contact-email-addr
sch-smart-licensing@cisco.com
Step 5
http-proxy proxy-address proxy-port port-number
Example:
Device(config-call-home)# http-proxy 198.51.100.10
port 3128
Step 6 profile CiscoTAC-1
Example:
Device(config-call-home)# profile CiscoTAC-1
Step 7
destination transport-method http
Example:
Device(config-call-home-profile)# destination
transport-method http
Step 8 no destination transport-method email
Example:
Device(config-call-home-profile)# no destination
transport-method email
Step 9
profile name
Example:
Device(config-call-home)# profile test1
Step 10 reporting smart-licensing-data
Example:
Device(config-call-home-profile)# reporting
smart-licensing-data
Step 11
destination transport-method http
Example:
Device(config-call-home-profile)# destination
transport-method http
Step 12 destination address http url
Example:
Device(config-call-home-profile)# destination
address http
https://tools.cisco.com/its/service/oddce/services/DDCEService
Step 13 active
Example:
Device(config-call-home-profile)# active
System Management Configuration Guide, Cisco IOS XE Gibraltar 16.10.x (Catalyst 9200 Switches)
94
Purpose
Configures the proxy server information to the Call Home
service.
By default, the CiscoTAC-1 profile is inactive. To use this
profile with the Call Home service, you must enable the
profile.
Enables the Call Home service via HTTP.
Disables the Call Home service via email.
Enters Call Home destination profile configuration mode
for the specified destination profile name. If the specified
destination profile does not exist, it is created.
Enables data sharing with the Call Home service via HTTP.
Enables the HTTP message transport method.
Connects to CSSM.
Enables the destination profile.
Configuring Smart Licensing