Cisco Catalyst 9200 Configuration Manual page 39

Administering the Device
3. hostname name
4. end
5. show running-config
6. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Device> enable
Step 2
configure terminal
Example:
Device# configure terminal
Step 3 hostname name
Example:
Device(config)# hostname
remote-users
Step 4 end
Example:
remote-users(config)#end
remote-users#
Step 5 show running-config
Example:
Device# show running-config
Step 6
copy running-config startup-config
Example:
Device# copy running-config startup-config
System Management Configuration Guide, Cisco IOS XE Gibraltar 16.10.x (Catalyst 9200 Switches)
Purpose
Enables privileged EXEC mode. Enter your password if
prompted.
Enters the global configuration mode.
Configures a system name. When you set the system name,
it is also used as the system prompt.
The default setting is Switch.
The name must follow the rules for ARPANET hostnames.
They must start with a letter, end with a letter or digit, and
have as interior characters only letters, digits, and hyphens.
Names can be up to 63 characters.
Returns to priviliged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
Configuring a System Name
25