Putting Models 3430 Plus, 3440 Plus, And 3440 Enhanced In Cli Mode - Troxler 3430 Manual Of Operation And Instruction
Hide thumbs
Also See for 3430:
- Operation and instruction manual (182 pages) ,
- Installation procedures manual (8 pages) ,
- Manual of operation and instruction (142 pages)
Table of Contents
Advertisement
Putting Models 3430 Plus, 3440 Plus,
and 3440 Enhanced in CLI Mode
1. On the gauge keypad, press the "Setup" button. The Setup
Menu displays on the gauge.
2. On the gauge keypad, press "." and then "9".
3. The gauge prompts for an access code. On the gauge keypad
press the numbers "4708" and then the "Enter" key. The
Extended Menu displays on the gauge.
4. From the Extended Menu, press "." and "9" on the gauge
keypad. The gauge again prompts you to input as access
code.
5. The gauge again gain prompts for an access code. On the
gauge keypad press the numbers "3767" and then the
"Enter" key. The Factory Menu displays.
6. From the Factory Menu, click the "1" button. The gauge
enables the Command Line Interface (CLI) mode and
returns to the Factory Menu. The gauge is now ready to
communicate with the computer.
32
- Quick Links:
- Figure 1: 3440 Plus Gauge
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 3430 and is the answer not in the manual?
Questions and answers
What is the activity level of the Am-241 source in the model 3430?