Positioning Module: Ricos Position - Wieland ricos Manual

2.22 Positioning module:
ricos
POSITION
• The positioning module has been
designed for positioning two
axes. Two independent up/down
counters are available in one
housing with 24 V
inputs/outputs.
• There are 16 I/O terminals
available, with 10 terminals each
for 24 V/0 V and 1 terminal each
for 24 V/ 0 V with interference
suppression. These can be used
by sensors (high-speed sensors
with interference suppression)
and outputs as an imported or
incoming supply. There is only
one common reference
potential for sensors and
outputs.
© 2002 Wieland Electric GmbH Version 2.4* (December 2002)
Part no. 05.591.3389.0 © 2002 Wieland Electric GmbH
Basic principles, overview and ordering information
ricos
POSITION
95