Technical Data Of Ricos Counter - Wieland ricos Manual

Table of Contents

Advertisement

Basic principles, overview and ordering information
In display mode, counter data is displayed in 4-digit hexadecimal format. In the
case of 32 bit counters, the 4 digits with the lowest value and the 4 digits with the
highest value are indicated separately. The following display is produced,
depending on the position of the channel cursor (yellow LED):
Number and type of counter Position of the channel cursor
4 x 16 bit
2 x 32 bit
2.20.11
Technical data of
ricos COUNTER
Part no.
Module identifier
Number of counters
Counting frequency
Number of inputs/outputs
External supply voltage
Power consumption of external 24 V power
supply
Power consumption of internal 5 V power
supply
Inputs
Switching level
Input current
Electrical isolation to internal bus
Concurrence
Signal delay
Outputs
Max. output current per output
Max. total current of module
Switching level
Electrical isolation to internal bus
Concurrence
Free-wheeling diode
Signal delay
Power supply for high-speed sensors (terminals X2.21 / X2.22)
Voltage
Current
See also "General technical data" on page 107.
82
on:
X1.0, X1.2, X1.4, X1.6
X1.1, X1.3, X1.5, X1.7
X2.0, X2.2, X2.4, X2.6
X2.1, X2.3, X2.5, X2.7
X1.0, X1.2, X1.4, X1.6
X1.1, X1.3, X1.5, X1.7
X2.0, X2.2, X2.4, X2.6
X2.1, X2.3, X2.5, X2.7
MSW: Most Significant Word
LSW:
Least Significant Word
ricos
COUNTER
83.035.5400.1
10d / 0Ah (6 I/O bytes)
11d / 0Bh (10 I/O bytes)
4 (16 bit) or 2 (32 bit)
Max. 200 kHz
Adjustable interference suppression: 200 Hz,
2 kHz, 20 kHz, 200 kHz
12 inputs, 4 outputs
DC 24 V ± 20% max. 5% residual ripple
0.25 W (without input currents / load currents)
1.1 W
HIGH level +15 V to +30 V
LOW level -30 V to +5 V
min. HIGH level (+15 V), I ≥ 3.5 mA
max. LOW level (+5 V), I ≤ 1.0 mA
typically (+24 V), I = 7.5 mA
Yes, separately for each channel using optocouplers
100%
<1 µs (hardware)
1 A, overcurrent and short-circuit protection
4 A
HIGH level = supply voltage – 0.5 V
LOW level <= 1 V
Yes, separately for each channel using optocouplers
100%
Integrated
<300 µs (hardware)
DC 24 V
max. 1A
© 2002 Wieland Electric GmbH Version 2.4* (December 2002)
Display
Count Z1
Count Z2
Count Z3
Count Z4
Count Z1 MSW
Count Z1 LSW
Count Z2 MSW
Count Z2 LSW
Part no. 05.591.3389.0
© 2002 Wieland Electric GmbH

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents