Operation On The Ricos Bus Coupler - Wieland ricos Manual

Basic principles, overview and ordering information
2.22.8 Operation on the
All the inputs and outputs can be overwritten via FORCE or LOCK.
FORCE/LOCK modes have a direct influence on the inputs and outputs.
If FORCE/LOCK modes are set simultaneously and sent via the PLC overwrite
data, the following applies:
Overwrite
In display mode, counter data is displayed in 4-digit hexadecimal format. The 4
digits with the lowest value and the 4 digits with the highest value are indicated
separately. The following display is produced, depending on the position of the
channel cursor (yellow LED):
Number and
type of
counter
2 x 32 bit
104
ricos
bus coupler
Position of the channel cursor
on
X1.0, X1.2, X1.4, X1.6
X1.1, X1.3, X1.5, X1.7
X2.0, X2.2, X2.4, X2.6
X2.1, X2.3, X2.5, X2.7
© 2002 Wieland Electric GmbH Version 2.4* (December 2002)
Display
Count value Z1 MSW
Count value Z1 LSW
Count value Z2 MSW
Count value Z2 LSW
MSW: Most Significant Word
LSW: Least Significant Word
Part no. 05.591.3389.0 © 2002 Wieland Electric GmbH