2.23
Equipotential distribution board
The equipotential distribution board is used for the terminal expansion of DC 24 V
and 0 V potentials. It has 2 separate rows of terminals, each with 10 clamping
points. The connection system can thus be extended to 3- or 4-wire connection in
each case.
The equipotential distribution board can only be mounted on modules with the
appropriate locating clips. Modules with locating clips have a separate part number
(see "Overview").
Installing
Dismantling
2.23.1 Technical data of equipotential distribution board
Equipotential distribution board
Part no.
Number of terminal rows
Number of clamping points
Max. current consumption of individual terminal
See also "General technical data" on page 107.
© 2002 Wieland Electric GmbH Version 2.4* (December 2002)
Part no. 05.591.3389.0
© 2002 Wieland Electric GmbH
Basic principles, overview and ordering information
The equipotential distribution board (1)
is pushed from the front into the
location hole (2) on the module, until
the lock of the distribution board clicks
into place.
Press the lock (1) of the equipotential
distribution board in direction A with a
screwdriver.
Remove the equipotential distribution board
in direction B.
83.039.0000.0
2 (isolated)
20 (10 per row)
8 A
107