Carel µAM User Manual page 65

8.1 Technical specifications
Power supply
Power supply input (classification to UL873)
Operating conditions
Storage conditions
Dimensions
Environmental pollution
Degree of pollution
Category of resistance to heat and fire
Software class and structure
Index of protection
Ball pressure test temperature on the plastic used for the casing
Classification according to protection against electric shock
Period of electrical stress across the insulating parts
Control device designed to be supplied to:
Protection against short-circuits
Immunity against voltage surges
Cross-section of the wires
Precision of temperature measurement
Precision of humidity measurement (on the models fitted with humidity probe)
Firmware
8.2 Compatibility with other devices
The table below shows the firmware versions of the various controllers compatible with the
Component Firmware
acqua terminal Starting from version 1.2
e-droset terminal Starting from version 1.2
e-drofan Starting from version 1.9
µC SE
2 Starting from version 1.0
+030220460 rel. 1.0 - 08.05.2007
µAM
8. CARACTERISTICS
must be guaranteed by the manufacturer of the appliance that the µAM
.
µAM
Tab. 8.b
24 Vac ±15 %, 50/60 Hz 70 mA 1,5 VA or
31 Vdc ± 29 % 70 mA (to EN60730-1)
24 V ac, 50-60Hz, Class 2
25.5 - 36.25 V dc, Class 2
Power input, max 1 watt
Outputs: RS485 serial connection, Class 2
0 to 50 °C
10 to 85% rH non-condensing
-20 to 70 °C
0 to 85 % rH non-condensing
W=135 mm, H=86 mm, D=30
normal
II
A
A
IP30
100 °C
3, to be integrated into class 1 or 2 appliances
long
manufacturers, installers and maintenance personnel
is integrated into, or by the final installer
category 1
0.5 to 1.5 mm
2
±2 °C
±10% rH
version 1.1
33
Tab. 8.a