Blizzard Lighting ENIGMA M4 User Manual page 40

7. You can press the soft key
press the Macro key in the "Select" section to play the macro if the record window is already exited.
8. The macro show begins to run immediately after the play soft key is pressed.
9. It will stop automatically when finished playing.
Note: Recording begins once the record key is pressed. If there is a time slot without an operation at the
beginning, it will run out when you begin. You can delete it if you do not need that time slot.
8.6.3 Edit Macro Show
You can revise the macro show after it is created. For example, you may add in a needed playback to the saved macro
show recording.
1. Enter the show recording that needs to be edited.
2. Press the record key
3. Output the playback or preset at the right time.
4. Fade out all playback or presets and press the record key
5. You will find the new playback or preset has been added, and will be listed on the left.
Edit macro show details:
1. The operation status of the playback or presets will be listed when you select the names on the left side bar.
2. You may delete all operations from the selected playback or preset using the option [Delete Types].
3. You can delete currently selected operations by using the option [Delete Items].
Enigma™ M4 Manual - Rev A
on the record window when needing to run the macro show. You can also
and play the music again.
Page 40
again and select [Merge] on the call out window.
(c) 2020 Blizzard Lighting, LLC