5. Presets
You can save one or more attributes of fixtures to the preset keys in advance (such as color, gobos, etc.) so that you can
change the attributes rapidly when programming, or during a live show.
5.1 Editing Presets
Although each preset could save all the attributes of a fixture, it is easier to operate the controller if you create some
presets that have only positions, colors, gobos, etc.
1. Select a fixture.
2. Use the attribute keys and wheels to setup your desired effects.
3. Press the Edit Presets key to enter the Preset Edit menu.
There are 3 different Save Modes to choose from:
• Current Attr. — All channel values of selected fixtures in the current attribute key will be saved.
• All Attribute — All channels values of selected fixtures will be saved.
• Changed Attr. — All channels values of selected fixtures that have been edited will be saved.
There are 2 different Preset Modes to choose from:
• Normal — The preset can only be used by selected fixtures when creating.
• Global — You can select one of the fixtures to create and save a preset, and it can be used by all the fixtures of the
same model.
Enigma™ M4 Manual - Rev A
Page 19
(c) 2020 Blizzard Lighting, LLC