Time For Playback - Blizzard Lighting ENIGMA M4 User Manual

7.4.2.5 Fixture Order
The [Fixture Order] in the Cue-lists should run with fixture
overlap or an effect. You will not find the effects if you did not
setup fixture overlap or effect in advance.
For steps to setup fixture order, please refer to chapter 4.3.2.
However, you may close some of fixtures if you don't want them
run with fixture overlap. The closed fixture(s) will start to run as
soon as the first fixture(s) begin, and finish at the same time as
last fixture(s) ended.
7.4.2.6 Delete a Cue-list Step
1. Press the Edit Playback key in LIVE SHOW.
2. Select a Cue-list to be edited.
3. Select a step to be deleted.
4. Press [Delete Cue].
5. Press [Renumber] to realign the number.
6. Press the Edit Playback key to quit.

7.5 Time for Playback

Each playback has its own running time. There are 4 types of global times for Cue-list playbacks, and 3 types of global
times for Cue playbacks.
• Cue-list Playback: Delay In, Fade In, Delay Out, and Fade Out.
• Cue Playback: Delay In, Fade In, and Fade Out.
The playbacks offer individual attribute times and snap percentage settings. You can also set the fixture order and fixture
order direction for each step on this menu.
7.5.1 Set the Global Times
Enigma™ M4 Manual - Rev A
Page 30
(c) 2020 Blizzard Lighting, LLC