Groups - Blizzard Lighting ENIGMA M4 User Manual

4.2.6 Fan Effects
Fan effects are widely used in Pan and Tilt attributes, but they can also be applied to other attributes such as Color Mix. If
fixtures with tri-color channels are used, you can apply a rainbow effect.
We suggest that you not to use less than 4 fixtures, to get a better scene.
1. Select the fixtures.
2. Select an attribute key, for example: Tilt/Pan.
3. Press [Fixture Open/Full].
4. Press [Fixture Align=Off].
There are several modes to align fixtures:
• Mid 1 — Alignment based on middle fixtures, with normal alignment.
• Mid 2 — Alignment based on middle fixtures, with fine alignment.
• Mid 3 — Alignment based on middle fixtures, with greater alignment.
• Left — Alignment based on fixtures located on the far left.
• Right — Alignment based on fixtures located on the far right.
5. Set the fan effect by using the Wheels A, B or C.
4.2.7 Clear Options
After you finish manually operating fixtures, you can use the Clear key to manually clear out operation data.
• Clear Selected Fixtures — A single press of the Clear key will clear any selected fixtures.
• Clear All Fixtures — Double tapping the Clear key will clear all fixtures.
• Clear All Presets — Press and hold down the Clear key, and then select the [Clear All Presets] soft key.
• Clear All Effects — Press and hold down the Clear key, and then select the [Clear All Effects] soft key.
If the Clear key is pressed/held, then let go (without selecting either soft key), this is the same as Clear Selected Fixtures.

4.3 Groups

One or more fixtures can be grouped for quick selection.
The group soft key will turn brown when it is saved. The group number and name will be
shown on the relevant soft key.
4.3.1 How to Create a Group
To create a group, press [Group] on LIVE
SHOW, then follow these steps:
1. Press [Save Group].
2. Select the fixtures.
3. Select a soft key on the Groups
section. If there was an already
existing group, it will ask you if you
want to overwrite it.
4. To edit or create more groups, you
can repeat these steps.
5. Press [Return] or Exit to quit.
Enigma™ M4 Manual - Rev A
Page 16
(c) 2020 Blizzard Lighting, LLC