Blizzard Lighting ENIGMA M4 User Manual page 12

Patching the User Library
You can select the model directly on the touch screen or use Wheel D when patching the user library.
• Press [A] on the Start DMX Address option, and you will see other output options to choose from. Input a value
into the blank field to setup the initial starting DMX address.
• Pressing Wheel D will switch the cursor to the Unit start number option. Input a value in the blank field of the Unit
start number.
• Pressing Wheel D will then switch the cursor to option Quantity. Input a value in the
blank field for Quantity.
• Press [Confirm] to finish patching, and the "PATCH SETUP" will be renewed
automatically.
• Press [Return] and quit to LIVE SHOW.
Note: The field will turn RED if the DMX address
or unit number were previously used in the "initial
DMX address" or "Unit start number".
After the fixture is successfully patched, the soft key on the touch screen will turn to dark blue, and the model name of the
fixture will be shown on the soft key.
Enigma™ M4 Manual - Rev A
Page 12
(c) 2020 Blizzard Lighting, LLC