Blizzard Lighting ENIGMA M4 User Manual page 17

4.3.2 Manage Groups
1. Press [Group] to enter Group Program.
2. Press [Manage Groups].
3. Select the group you want to edit. It will list all the fixtures in the selected group.
4. You will find the fixture order as when you selected them.
Fixture order 1 to 5 is not the same as order 5 to 1. The order is important when applying effects and overlap functions,
which will be distributed along the order. You can change the fixture order in the group, so that the fixtures will run in
order when using this group again.
a. Select [Fixture Order] and call out the Fixture Order Setup window.
b. Set the step number by using the soft key [Previous Step] or [Next Step].
c. Select one or more fixtures for the step number. Please note that the large RED numbers on fixture's soft key
indicate the running order, while the right bottom WHITE numbers indicate the fixture unit numbers.
d. Repeat steps B and C until you are finished setting them.
e. Press [Exit] to confirm and save the fixture order.
Enigma™ M4 Manual - Rev A
Page 17
(c) 2020 Blizzard Lighting, LLC