Blizzard Lighting ENIGMA M4 User Manual page 29

7.4.2.4 Fixture Overlap
The [Fixture Overlap] feature allows you to run a series of fixtures with chase effects in one step.
The range of overlap is from 0%~100%.
When overlap=100%, all fixtures will change together. If overlap=50%, the second fixture will not start until the first
fixture is halfway (50%) through fading. The fixture running order follows the setting of the fixture order.
The running time will be divided equally for each fixture. So if there are 5 fixtures running at 10 seconds for the step, after
setting the fixture overlap, each fixture will use 2 seconds to finish its effect.
Page 29
Enigma™ M4 Manual - Rev A (c) 2020 Blizzard Lighting, LLC