No Hold Conference; Adding A Participant To No Hold Conference - Avaya J189 Using Manual

4. To end the multicast page, do one of the following:
• Press End Call.
• If you use the handset as an audio device, hang up.

No Hold Conference

With the No Hold Conference feature, you can add participants to your call while continuing your
active conversation. The No Hold Conference feature lets you create a conference call without
putting any call participant on hold.
For example, if you press the administered No Hold Conference button and then dial an
extension the participant that answers the call joins the no hold conference.
Using the No Hold Conference button you can add more participants to the no hold conference.
The administrator can pre-configure only one number on System Manager. When you press the
No Hold Conference button, the call is placed to the pre-configured number when the participant
answers the call joins the no hold conference.
If the participants do not answer the call within the configured time-out duration Avaya J100 Series
IP Phones will display the appropriate message on the phone screen.

Adding a participant to no hold conference

About this task
You can add participants to your call while continuing your conversation without interruption. You
can add up to six participants in the no hold conference call.
Before you begin
Ensure that the administrator has activated the no hold conference feature, and you are on an call.
Procedure
1. During an active call, on the phone screen, press Main menu > Features.
2. Press No Hold Conference.
3. You can add users to a no hold conference by using one of the following methods:
• If an extension number is pre-configured by your administrator, you can press Select.
• If the extension number is not pre-configured, you will get a Dial screen to enter the
extension number, press OK.
4. To add more participants to the existing no hold conference, repeat Steps 2 and 3.
Related links
Handling calls and conferences using Multiple Device Access
Multiple Device Access
April 2021
on page 92
Using Avaya J189 SIP IP Phone in Avaya Aura
Comments on this document? infodev@avaya.com
No Hold Conference
on page 92
®
95