Setting Mute Alert; Visual Alerting - Avaya J139 Manual

8. Press one of the following:
• Replace: To assign a contact to an assigned entry.
• Clear: To remove a contact from the entry.
9. Press Save.

Setting Mute alert

About this task
Use this procedure to receive a notification alert when your phone is on mute and you try to
answer a call.
Before you begin
Ensure that the feature is activated by the administrator. Contact your administrator for details.
Procedure
1. Press Main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Phone, and press Select.
4. Scroll to Mute alerting option.
5. Press Toggle to select one of the following:
• Audible: The phone beeps to notify that you have muted your phone.
• Visual: The phone displays the mute icon after some time on the phone status line.
• Both: The phone beeps and displays a mute alert message.
• None: The phone disables the mute alert.
6. Press Save.

Visual alerting

The beacon LED works in the following manner to indicate incoming calls and messages:
• If there is an incoming call, the beacon LED blinks.
• If there are new voice mail messages, the beacon LED is lit continuously.
• If the speaker is on during an active call and there are new voice mail messages, the beacon
LED turns off every 15 seconds.
Note:
If the call is on hold, the beacon LED stops flashing.
April 2020 Using Avaya J139 IP Phone in an Open SIP environment
Comments on this document? infodev@avaya.com
Phone
95