Driveline Attachment - Schulte SDX-102 Operator's Manual

Never work under the Implement, the framework, or any lifted
component unless the Implement is securely supported or blocked up to
prevent sudden or inadvertent falling which could cause serious injury or
even death.
Never crawl under a raised Implement supported solely by the Tractor 3-Point hitch.
Release of the control lever or mechanical failure will result in the Implement falling and
possible injury or death. Always securely block up the Implement before crawling
underneath to perform repairs and service.

7. DRIVELINE ATTACHMENT

The driveline yoke and tractor PTO shaft must be dirt free and greased for attachment.
To Connect the snow blower driveline to the tractor,
lift the PTO output shaft off of the PTO holder A.
Twist the driveline yoke collar and align the grooves
and spines of the yoke with those of the PTO shaft,
release the locking collar, and position the yoke
until the locking collar balls are seated onto the
PTO shaft. Push and pull the driveline back and
forth several times to ensure a secure attachment.
SDX-102 05/19
© 2019 Alamo Group Inc.
OPERATION
(SSB-33)
Operation Section 4-11
(S3PT-19)