Table of Contents
Advertisement
MAINTENANCE
INSTRUCTIONS FOR CHANGING ROTATION ON 330-680 PARALLEL GEARBOXES
1. Drain Oil
2. Gearboxes are separated from each other already for ease of illustration rotation change.
3. Support gearbox slightly off workspace.
4. Remove 10 bolts to separate gearbox halves.
5. Insert bar in slot provided on either side of gearbox to pry apart.
6. Lift out idler gear and bearing cones as one
assembly and set aside.
SDX-102 05/19
Maintenance Section 5-9
© 2019 Alamo Group Inc.
Advertisement
Table of Contents
